Product ID:ACRYLIC SEMI-GLOSS WHITE AND TINT BASE, CODE L1000
MSDS Date:11/10/1993
FSC:8010
NIIN:00D003245
MSDS Number: BTHKR

ALASKAN PAINT MFG CO, INC

2040 SPAR AVE
ANCHORAGE, AL 99501
US

Emergency Phone: 907-272-2942/907-563-3393 POI CTRL

Preparer: RONALD J. FULLERTON

Cage: ALASK

ALASKAN PAINT MFG CO/ANCHORAGE, AK 99501

ANCHORAGE

Cage: ALASK

AMMONIA (SARA III)

CAS: 7664-41-7

RTECS: BO0875000

Fraction By Weight: <0.05%

OSHA PEL 50 PPM

ACGIH TLV: 25 PPM/35 STEL; 9394

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

LD50 LC50 Mixture:NOT KNOWN
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE/SKIN:IRRITATION. INHAL:IRRITATION
OF MUCOUS MEMBRANES, RESPIRATOR TRACT. INGEST:GASTROINTESTINAL
IRRITATION.
Effects of Overexposure:EYE:REDNESS, DISCOMFORT. SKIN:REDNESS, ITCHING.
INHAL:HEADACHE, NAUSEA. INGEST:NAUSEA, VOMITING, DIARRHEA.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHAL:REMOVE TO FRESH AIR. SKIN:THOROUGHLY WASH AREA W/SOAP
AND WATER. REMOVE CONTAMINATED CLOTHING. EYE:FLUSH IMMED W/LG AMTS
OF WATER FOR @ LEAST 15MINS. CONSULT A PHYSICIAN IF IRRIT IS
APPARAENT. I NGEST:IF CONSCIOUS INDUCE VOMITING @ ONCE BY GIVING 2
GLASSES OF WATER TO DRINK AND PLACE FINGER AT BACK OF THROAT. CALL
PHYSICIAN IMMED.

Flash Point:NON-FLAMMAMBEL
Extinguishing Media:MATERIAL IS NON-FLAMMABLE. USE APPROPRIATE
EXTINGUISHING MEDIA FOR SURROUNDING FIRES.
Fire Fighting Procedures:NONE SPECIFIED BY MANUFACTURER.
Unusual Fire/Explosion Hazard:PAINT MAY SPATTER IF TEMPERATURE EXCEEDS
BOILING POINT OF WATER.

Spill Release Procedures:STOP SPILL AT SOURCE. DKIE AREA TO PREVENT
SPREADING. ABSORB LIQUID ON VERMICULITE, FLOOR ABSORBENT, OR OTHER
INERT MATERIAL. PLACE IN SUITABLE CONTAINER FOR RECOVERY OR
DISPOSAL. FLOORS MAY BE SLIPPE RY. CARE SHOULD BE TAKEN TO AVOID
FALLS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP FROM FREEZING, PRODUCT STABILITY
MAY BE AFFECTED.
Other Precautions:PAINT SPRAY MUST NOT BE INHALED; RESPIRATORS SHOULD
BE PROVIDED IF ENGINEERING CONTROLS ARE NOT ADEQUATE. KEEP
CONTAINERS CLOSED WHEN NOT IN USE. READ AND OBSERVE ALL PRECAUTIONS
ON THE PRODUCT LABEL.

Respiratory Protection:NONE REQUIRED IF GOOD VENTILATION IS MAINTAINED.
OTHERWISE WEAR NIOSH APPROVED RESPIRATOR WHERE VAPOR CONCENTRATINS
ARE ENCOUNTERED.
Ventilation:LOCAL OR MECHANICAL VENITLATION TO REDUCE CONCENTRATION
BELOW TLV.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:SAFETY GLASSES OR GOGGLES.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER HANDLING MATERIAL &
PRIOR TO EAT/SMOKE/DRINK. LAUNDRY CONTAMINATED CLOTHING PRIOR TO
REUSE.
Supplemental Safety and Health

HCC:N1
Vapor Density:>AIR
pH:8-9
Evaporation Rate & Reference:Appearance and Odor:UNTINTED WHITE LIQUID PAINT WITH SLIGHT AMMONIA
ODOR.
Percent Volatiles by Volume:60

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:KEEP FROM FREEZING. TEMPERATURE EXCEEDING
BOILING POINT OF WATER (PAINT WILL SPLATTER).
Hazardous Decomposition Products:OXIDES OF CARBON, OXIDES OF NITROGEN,
AND MONOMER FUMES.

Waste Disposal Methods:DISPOSE OF WASTE IN ACCORDANCE WITH LOCAL, STATE
AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.